Established in 1993, Guanfa Valve Manufacture Co., Ltd. is specialized China hose clamp manufacturer and distributor of valves, hoses, tubes and pipes. Our oem hose clamps are suitable for acid, alkali, water, steam, seawater, coal gas and natural gas. They are widely used in petroleum, chemical, paper making, fertilizer, brewing and metallurgy. The use of specialized software of Pro/E and CAD has shorted the P&D and trial manufacture cycle, and greatly improved the service life and dependability of products. Our high-quality products have been exported to the North Amercia, UK, USA, Germany, Italy, India, France, Australia, Japan.

Pack of 34 worm gear hose clamps in eight popular sizes, 1 1/16in. through 2 3/4in.. You get four 1 1/16in. size, six each of 1 1/4in., 1 1/2in. and 1 3/4in., four each of 2in. and 2 1/4in., and 2 each of 2 1/2in. and 2 3/4in. sizes.
Mechanical interlock construction
Combination 5/16'' hex/slotted screw head
Marine grade
Non-magnetic
Highly corrosion resistant
Both the band and the screw assembly of these hose clamps are made of 100% 300 series stainless steel. Two clamps per hose end are recommended below the waterline. Hoses are measured by inside diameter, so use a clamp with a maximum opening of at least 1/4'' larger.

10-pack
4-inch diameter
Hose Clamp, 2.3125" - 3.25"
10-pack
4-inch diameter
SS Hose Clamp Kit For Fuel LineS&J Stock # 970170Sh. Wt. 1 lb.
Oil and abrasion resistant tube and cover Dual braided 4-spiral reinforced construction Vinyl guards at both ends 1/4" male x 1/4" male ends Made in the USA 300 PSI working pressure, 1200 burst pressure
Two clamps per hose end are recommended below the waterline. Hoses are measured by inside diameter, so use a clamp with a maximum opening of at least 1/4'' larger.

Go to China Valve Manufacturer Catalog or China Valve Catalog to find more China Products!