Established in 1993, Guanfa Valve Manufacture Co., Ltd. is specialized China flexible pipe manufacturer and distributor of valves, hoses, tubes and pipes. Our oem flexible pipes are suitable for acid, alkali, water, steam, seawater, coal gas and natural gas. They are widely used in petroleum, chemical, paper making, fertilizer, brewing and metallurgy. The use of specialized software of Pro/E and CAD has shorted the P&D and trial manufacture cycle, and greatly improved the service life and dependability of products. Our high-quality products have been exported to the North Amercia, UK, USA, Germany, Italy, India, France, Australia, Japan.

PVC pipe is great stuff for making intake snorkels but, in this case, it would have been very difficult to route a large enough pipe from the fog light area to the airbox. The problem is the limited selection of angles available in PVC bends.
An easier option is flexible pipe. But note that not all flexible pipe is the same - many have a near-smooth inside wall (which helps maintain airflow) while others are very convoluted (which restricts air flow). Cost also varies massively so shop around. Our 3 inch flexible pipe had been sitting in the shed for several years so it cost nothing.
With the original intake snorkel removed, we could fit the end of our flexible pipe to the airbox. This was easy in the case of the VR4 – our flexible pipe slipped tightly over the snout of the airbox.In some vehicles you might be able to run the flexible pipe from the airbox to the front of the car without cutting any metal. However, in the VR4 we were forced to put a hole through a difficult to access section of the inner guard alongside the battery tray. Note that there’s plenty of support structure in this vicinity, so you can get away with creating a 3 inch hole.

Mesa's flexible pipe is designed for Aboveground Storage tank applications such as roof drains and skimmer lines. Mesa's flexible pipe designs are compatible for continuous service, both externally and internally, in a wide range of pH solutions and chemicals.
Resist-All-Clad
Floating 150 lb. ANSI raised face flanges
Stainless steel armored cover
Non-corrugated, smooth internal fluid-way (Mesalon)
Steel fittings protected by thick nylon coating, inside and out
Fully preformed repeating lay pattern (multiple-coil) -- allows for use in small diameter tanks
Tether assembly to ensure correct and reliable placement
Armor-Clad
Weld-on 150 lb. ANSI raised face flanges
Stainless steel armored cover
Non-corrugated, smooth internal fluid-way
Full-flow, compression-sealed end fittings
Single-coil repeating lay pattern
Can be installed as one-continuous length--center sump to shell
Mesaflex
Weld-on flanges or bolt-on companion flanges
Nylon protective scuff-jacket
Non-corrugated, smooth internal fluid-way
Full-flow, sealed internal expanded end fittings
Single-coil repeating lay pattern
Installed with support saddle, chain and clevis
Can be installed as one-continuous length--center sump to shell
Installed with 360 deg. coil

Go to China Valve Manufacturer Catalog or China Valve Catalog to find more China Products!