Established in 1993, Guanfa Valve Manufacture Co., Ltd. is specialized China diverter valve manufacturer and distributor of valves, hoses, tubes and pipes. Our oem diverter valves are suitable for acid, alkali, water, steam, seawater, coal gas and natural gas. They are widely used in petroleum, chemical, paper making, fertilizer, brewing and metallurgy. The use of specialized software of Pro/E and CAD has shorted the P&D and trial manufacture cycle, and greatly improved the service life and dependability of products. Our high-quality products have been exported to the North Amercia, UK, USA, Germany, Italy, India, France, Australia, Japan.

This type of valve is used in central heating systems to guarantee a hot return to the boiler and consequently keep thermal levels high enough to prevent vapour condensation. Mixing, with a linear characteristic curve for delivery and return water; is performed by the shape of the profiled paths. Mixing is done by a rotor with circular segment in the three-way model and by a butterfly rotor in the four-way model. MUT valves are furnished with manual controls. They can be motorized at any time and without any problems by using MUT V series motors and/or motors marketed by manufacturers of control systems. MUT series 3000 valves are made with a brass body and internal rotor The rotation angle of the rotor; used for regulation, is approximately 90° and corresponds to the graduations going from 0 to 10 on the identification plate (it is without stops and can consequently rotate 360°).

Replaces the factory-fit Bosch diverter valve to provide a faster response and more reliable operation. Reduces lag and sharpens throttle-response - meaning faster acceleration and improved driveability. Same width as your factory Bosch valve and only 20% taller. Fits under engine covers for VWs and even in the Porsche Twin Turbo. The Hyperboost valve reduces turbo lag as it recovers faster when you 'hit the throttle' reduced lag = faster acceleration. Throttle modulation is smoother and feels more accurate under your foot. These valves also perform accurately and reliably time and time again, even in the most extreme conditions. Inadequate/defective standard valves have extended lag, loss of boost, sluggish throttle response. A HyperBoost valve can clear up the previously mentioned problems and offers reliable action, time and time again. If your car has been chipped, a HyperBoost valve will optimise the performance benefits.

Go to China Valve Manufacturer Catalog or China Valve Catalog to find more China Products!