Established in 1993, Guanfa Valve Manufacture Co., Ltd. is specialized China cartridge valve manufacturer and distributor of valves, hoses, tubes and pipes. Our oem cartridge valves are suitable for acid, alkali, water, steam, seawater, coal gas and natural gas. They are widely used in petroleum, chemical, paper making, fertilizer, brewing and metallurgy. The use of specialized software of Pro/E and CAD has shorted the P&D and trial manufacture cycle, and greatly improved the service life and dependability of products. Our high-quality products have been exported to the North Amercia, UK, USA, Germany, Italy, India, France, Australia, Japan.

Sauer-Danfoss manufactures a wide variety of flow- and pressure-regulating cartridge valves. The range of pressure-regulating valves includes direct-acting, pilot-operated, sequence, pressure- reducing, and overcenter valves. They allow flow up to 380 l/min (100 gpm) and pressures up to 420 bar (6092 psi).Pedal Valve Installation Notice: flush pipe must be 5cm high to ground surface, and pedal board must be 10cm. Be sure to keep the inside pipe clean, fasten onto wall/ground, forbid any loose. Material: Brass Body, Brass Cartridge
Finish: Chromium Plated. Packing: Dustproof bag + box + carton. Inlet*outlet spec: 20*25/25*25. Simple, cheap and easy to install. Pedal Valve is designed according to the clue of Durability only if intentional destroy.It's effective in saving water, for example, we open then close water by hand,yet pedal valve is pedal open, and lift close directly.

3-Way Cartridge Valves with Spool Position Feedback, Type CVU-**-EPQ; Sizes 32 and 50 Flow Rates up to 750 L/min (200 USgpm). Maximum Pressure: 315 bar (4500 psi).Designed to fit into No. 10 size (7/8 in. to 14 Thread) industry cavity, 10 Series solenoid operated, spool type valves are available in Tandem Center, Open Center, Closed Center, and Motor Spool configurations. Uni-body design and oversized seating allow high-torque tightening of valves during installation. Products have completely encapsulated coils designed for continuous duty and achieve flows up to 10.0 gpm at operating pressure of 5,000 psi. A unique, uni-body design and oversized seating allow high-torque tightening of the valves during installation, eliminating the need for additional locking mechanisms or lock wires.

Go to China Valve Manufacturer Catalog or China Valve Catalog to find more China Products!