Established in 1993, Guanfa Valve Manufacture Co., Ltd. is specialized China brass valve manufacturer and distributor of valves, hoses, tubes and pipes. Our oem brass valves are suitable for acid, alkali, water, steam, seawater, coal gas and natural gas. They are widely used in petroleum, chemical, paper making, fertilizer, brewing and metallurgy. The use of specialized software of Pro/E and CAD has shorted the P&D and trial manufacture cycle, and greatly improved the service life and dependability of products. Our high-quality products have been exported to the North Amercia, UK, USA, Germany, Italy, India, France, Australia, Japan.

The brass valve that controls the flow of gas into the Hurricane burner. This is included in the #7335 hose assembly, or available separately here. Water Cop Systems automatically shutoff the water when a leak or flood is detected! This greatly reduces the risk of damage to your property from plumbing problems. A Full-Flow Valve meaning NO reduction in water flow. Can handle up too 600 psi.Designed so plumbers can "rough it" into plumbing so a Water Cop System can be added in the future. Brass solenoid valves are normally closed pilot operated that will operate between 5 and 300 psi, they are available from 1/4" through 3". Double Check Valves with DZR brass Valve Bodies and compression or female BSP connections. Sprung-loaded Cartridges with resilient seats provide positive closure, no water hammer and low opening pressure. Hotstamped DZR compression nuts with fine thread minimises the torque required to make the joint.

"MINTCRAFT" BRASS SHUT OFF VALVE. Made of brass. Brass Shutoff Valve attaches to the end of your garden hose and provides finger tip water control. Saves water, time and steps-dozens of uses in any hose system. Shut-off knob controls water from ON to OFF
Flow control valve for faucets has a heavy-duty brass body and ball valve. Used w/copper, aluminum, steel, & plastic tubing where applicable. Used for low pressure applications where a quick on/off operation is desired for a generous flow. Rated for service at 30 PSI. Solid bottom & o-ring seal prevents leakage to atmosphere. Used on fuel oil, water, gas, air, & LP gas. BRASS FLARE VALVE Used w/copper, aluminum, steel, & plastic tubing where applicable Used for low pressure applications where a quick on/off operation is desired for a generous flow Rated for service at 30 PSI Solid bottom & o-ring seal prevents leakage to atmosphere Used on fuel oil, water, gas, air, & LP gas Bulk 1/2"OD Tube x 3/4"FPT.

Go to China Valve Manufacturer Catalog or China Valve Catalog to find more China Products!